Carrier Infinity 59MN7C Furnace

59MN7C060C21–20
59 = 90%+ Condensing / Gas Furnace
M = Modulating / Heating Stages
N = Infinity / Tier
7 = 97% / Min. AFUE/NOx
C = Major Series
060 = 60,000 BTU / Heating Input
C = Constant Airflow Variable- Speed (VCA) ECM / Motor Type
21= 21.0″ / Width
— = N/A
20 = 2000 CFM / Airflow

The 59MN7C Multipoise Variable-Capacity Condensing Gas Furnace features the modulating Infinity System. The innovative modulating gas valve is at the heart of this furnace’s quiet operation, along with the constant airflow variable-speed Infinity ECM blower motor and variable-speed inducer motor. This furnace also provides 3.5 times tighter temperature control than single stage furnaces. With an Annual Fuel Utilization Efficiency (AFUE) up to 98.5%, this Infinity gas furnace provides exceptional savings over standard furnaces as well.
This Infinity Gas Furnace also features 4-way multipoise installation flexibility. The 59MN7C can be vented as a direct vent/two-pipe furnace or as an optional ventilated combustion air application. A Carrier Infinity Control and an Infinity Air Conditioner or Heat Pump can be used to form a complete Infinity System. Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement. All sizes are design certified in Canada. This furnace is not designed for use in recreation vehicles, manufactured (mobile) homes or outdoors.

STANDARD FEATURES

• Our quietest furnace. Compare for yourself at HVACpartners.com.
• All sizes meet ENERGY STAR Version 4.0 criteria for gas furnaces: 95%+AFUE
• Supports single- and multiple-zone Infinity systems.
• Ideal height 35” (889 mm) cabinet: short enough for taller coils, but still allows enough room for service.
• Infinity Features – match with the Infinity Control for Infinity System benefits
• Integral part of the Ideal Humidity System Technology.
• Silicon Nitride Power Heat Hot Surface Igniter.
• SmartEvap technology helps control humidity levels in the home when used with a compatible humidity control system.
• ComfortFan technology allows control of continuous fan speed from a compatible thermostat.
• Bluetooth provides enhanced serviceability and diagnostics.
• On-board NFC antenna makes setup a tap away when using the Carrier Service Technician App.
• 3 Digit Display shows fault codes and furnace status. • RAT and SAT thermistors can provide temperature rise. • 4-way multipoise design for upflow, downflow or horizontal installations, with unique vent elbow and optional throughthe-cabinet downflow venting capability. • Constant airflow variable-speed blower and inducer motors, modulating gas valve.
• Adjustable blower speed for cooling, continuous fan, and dehumidification.
• Aluminized-steel primary heat exchanger.
• Stainless-steel condensing secondary heat exchanger.
• Convertible to propane with gas conversion accessory list.
• Factory-configured ready for upflow applications.
• Fully-insulated casing including blower section.
• Convenient Air Purifier and Humidifier connections.
• Direct-vent/sealed combustion or ventilated combustion air venting.
• Installation flexibility: sidewall or vertical vent.
• Residential installations may be eligible for consumer financing through the Retail Credit Program.
• Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193.